Filter
Top Products
18 TASCAM CD-RW901
Track search
Press the ∆/˚ search key continuously on the front
panel, or the SEARCH ∆/˚ key on the remote con-
trol. To stop the search function, simply release the ∆
/˚ or the SEARCH key.
NOTE
The search function does not operate with MP3
discs.
Normal search
Using the number keys on the remote control, the num-
ber of the desired track can be entered directory. Even
numbers with two or three digits can be entered easily.
For example:
Track 9: press ‘9’ and 009 will be displayed.
Track 12: press ‘1’ and ‘2’ and 012 will be displayed.
Track 103: press ‘1’ and ‘0’ and ‘3’ and 103 will be displayed.
After input, press the PLAY key to start playback. Or,
the READY key to cue the track at its head position and
enter playback standby mode.
You can also enter the track number and start playback
by pushing the MULTI JOG dial or using the ENTER
key.
NOTE
This function cannot be used in Program or Ran-
dom mode.
Selecting by track number
Direct search
By specifying time from the start of a certain track, you
can start playback from a specified point of a specified
track.
Basic operation
During stop, play or playback standby modes, use the
number keys on the remote control to input the three-
digit track number (such as 002 for track 2), then the
desired elapsed time (***min **sec) from the start of
that track.
Example: To specify 1 min 30 sec from the start of
track 2, input “002 001 30”.
During input, the counter in the display will flash.
NOTE
Regardless of the time display mode (see “Time
display switching on page 20), the time from the
start of the specified track is displayed.
ª
Pressing the CLEAR key cancels the input at any stage
during input.
During stop or playback modes, when the final digit is
entered, the desired position is automatically located
and playback will begin from the desired point. During
playback standby mode, at the desired point the unit
will enter playback standby mode.
NOTE
If a point which does not exist is entered, Direct
Search time entry mode will be cancelled.
The direct search function cannot be used in pro-
gram or random mode.
For MP3 discs, time cannot be specified within a
track. However, if you input the three-digit track
number, playback will begin from the start of that
track.
4 − Playback operations