Filter
Top Products
TASCAM CD-RW901 21
Repeat playback
1. Press the REPEAT key to turn on the repeat
mode.
In this mode, all the tracks on the disc are played
continuously. The display shows
Repeat ON and the
indicator lights up
REPEAT.
During playback, if the repeat mode is turned
on, playback continues as before, and when the
last track nishes, playback resumes from the
rst track.
If the repeat mode is turned on when the deck is
stopped, press the
PLAY key to begin operation.
2. Press the
REPEAT key again to turn off repeat
mode.
Repeat OFF appears then the REPEAT indicator
turns off.
NOTE
Combining the repeat mode with the program, Sin-
gle-track playback and Random playback functions
will enable Program repeat, Single-track repeat and
Random repeat operations, respectively.
Settings for the repeat playback mode remain after
power is turned off, except the specified A-B sec-
tion (see “A to B repeat playback” on page 22).
EXT SYNC playback
In this mode, the unit will play back in synchroniza-
tion with the clock selected as digital input source
(OPTICAL, COAXIAL, AES/EBU).
When stopped, use the EXT SYNC option in the PLAY
sub-menu (see “Operation basics” on page 16) to set the
external synch playback mode on.
Select the input source for sync playback.
NOTE
When the EXT SYNC is on, and when the unit de-
tects a signal other than 44.1kHz, synchronization
with the clock of the selected digital input source
may fail, and EXT CLK Err! will be displayed. The audio
playback may also be affected.
If the selected digital input source is at 48kHz, using
the 48k Fs adjustment function allows the audio to be
played back at the correct pitch.
When stopped, and when in playback or playback ready
mode, press the SYNC REC key to turn the 48k Fs
adjustment function on or off. When the function is on,
48k Fs Adj will be displayed.
The setting remains until the EXT SYNC function is
set to off, and even the power is turned off.
NOTE
When the 48k Fs Adjustment is on, and when the
unit detects a signal other than 48kHz, synchroni
-
zation with the clock of the selected digital input
source may fail. The audio playback may also be
affected.
When the 48k Fs adjustment is on, the Pitch control
and Key control functions cannot be used.
Timer playback
By using an external timer, you can set the CD-RW901
to play the loaded disc automatically when the unit is
turned on by the timer.
1. First, plug the power cord of the CD-RW901 into
the power outlet of the timer.
2. Load a disc into the unit.
3. Switch the
TIMER switch on PLAY to enable
timer function on for the desired deck.
When Timer playback has been turned on, the
timer icon lights up in the display.
NOTE
The indicator flashes when a disc is not loaded into
the unit.
4. Set the timer to the desired time. Consult the
timer’s operation manual for details. At the set
time, the power to the CD-RW901 will be turned
on, and playback will automatically begin.
Timer indicator
4 − Playback operations