Teac AI-501DA Stereo Amplifier User Manual


 
17
EN
Connections with a computer
The computer does not recognize this unit.
e USB connection is only possible with computers
running the following operating systems.
Microsoft Windows
Windows XP (32-bit), Windows Vista (32/64-bit),
Windows 7 (32/64-bit)
Apple Macintosh
Mac OS X 10.6 (Snow Leopard)
(Mac OS X 10.6.4 or later)
Mac OS X 10.7 (Lion)
Mac OS X 10.8 (Mountain Lion)
(As of October, 2012)
Operation with other operating systems is not
guaranteed.
e You must install the dedicated driver on the com-
puter (page 14).
There is noise.
e If other applications are run while a music file is
being played back, the sound could break up and
noise might be heard. Avoid running other appli-
cations during playback.
e If you connect this unit with the computer via a
USB hub, noise might occur. If this happens, con-
nect this unit directly to the computer.
Music files cannot be played back.
e Launch the music playback software and start
playback after connecting this unit and the com-
puter and setting the input to USB.
If you connect this unit and the computer, or
switch the input to USB after launching the music
playback software, the audio data might not play
back properly.
e You must install the dedicated driver on the com-
puter (page 14).
Since a microcomputer is used in this unit, it might
not operate correctly sometimes due to noise and
other interference from outside the unit. If this
should occur, remove the AC cord from the power
socket and wait a while before repowering the unit
again.