Filter
Top Products
10
Precautions for use
V
Misuse of batteries could cause them to
rupture or leak leading to fire, injury or the
staining of items nearby. Please carefully read
and observe the precautions on page 3.
o
Point the remote control unit at the main unit’s remote
sensor from within 5 meters (16 feet) of it. Make sure
that there are no obstructions between the remote
control and the main unit.
o
If direct sunlight or strong artificial illumination shines
on the remote sensor, the remote control might not
function. If that is the case, move this unit to another
location.
o
If the remote control unit is operated near other
devices that generate infrared rays, or if other remote
control devices using infrared rays are used near the
unit, it might operate incorrectly. The other devices
might also operate incorrectly.
Using the remote control
Battery installation
Remove the cover from the back of the remote control
and insert two AAA batteries with their ¥/^ ends ori-
ented in the case as shown. Replace the cover.
Battery replacement
If the operation range of the remote control decreases,
the batteries have become exhausted. In this case, replace
the batteries with new ones.
For detailed information about the collection of batteries,
please contact your local municipality, your waste disposal
service or the point of sale where you purchased the
items.