Filter
Top Products
15
RECALL - EDIT - STORE
Presets in general
The TRIPLE•C holds 50 factory presets (ROM bank) and
you are able store 100 additional user presets in the RAM
bank. When scrolling through the presets you will locate
the user presets after the 50 factory presets.
Recall
To recall a preset:
• Press MENU.
• Dial the VALUE SET wheel until the display reads
“Recall”.
• Press ENTER.
• Use any wheel to scroll through the 50 Factory and 100
User presets. Until you have actually recalled a preset
you are previewing. While previewing the preset name
and number is blinking.
• Press ENTER to recall a preset.
The TRIPLE•C prompts "Recalled" for approximately
one second and returns preset-name display.
Edit
To edit preset parameters:
• Press MENU.
• Select “Edit Menu” using the VALUE SET wheel.
• Press ENTER.
• Select parameter using the PARAMETER wheel and
change values using the VALUE wheel.
Store
To store a preset with the same name:
• Press MENU.
• Turn the VALUE SET wheel until the display reads
“Store”.
• Press ENTER.
• The TRIPLE•C suggests the first available RAM space
as storing location but you can select any of the 100
locations using the VALUE SET wheel.
• Press ENTER twice to store.
To rename a preset while storing:
• Press MENU.
• Dial the VALUE SET wheel to until the display reads
“Store”.
• Press ENTER.
• Select storing space using the VALUE SET wheel.
• For altering the preset name; use the PARAMETER
wheel to move cursor and the VALUE SET wheel to
select character.
• Press ENTER twice to store the preset with the new
name.