Filter
Top Products
14
MIDI CC
Range: On/Off.
Determines whether the TRIPLE•C should respond to MIDI
Continuous Controllers or not. On page 29 you will find a
list of the TRIPLE•C Continuous Controllers.
Program bank
Determines which bank an external MIDI device will
address in the TRIPLE•C when sending a program change.
The options are: Factory, User or External.
When External is selected controller #32 can be used to
address either the Factory or the User bank.
Factory bank: Controller #32=0
User bank: Controller #32=1
Bulk Dump
Press ENTER to perform a total Bulk dump of all presets to
an external MIDI device such as a MIDI sequencer.
The TRIPLE•C is always ready to receive MIDI Bulk dump
information.
SysEx ID
Determines the Sys-Ex ID number of the unit. All effects
parameters; algo changes and routings can be changed
through MIDI Sys-Ex via an external MIDI device. In order
to define which unit the sent MIDI Sys-Ex information
should reach, the appropriate ID number must be set.
Link
Range:On/Off
Will link parameters between two Single Channel units
when connected and used either in a Stereo Setup or in a
Dual Mono setup.
Please see page 22 for further explanation.
View Angle
Adjusts the LCD display backlight for better viewing
comfort.
I/O SETUP