Tascam D00935220B Cassette Player User Manual


 
IMPORTANT SAFETY INSTRUCTIONS
TASCAM 202MKIV 19
4 − Recording
TASCAM 202MKIV 19
Use this function to create blanks between songs
for proper operation of the Computamatic Program
Search (CPS) function.
Press the REC MUTE key when recording reaches the
desired point. No signal is recorded for about 4 sec-
onds and then the deck enters the record-pause mode.
To resume recording, press the PAUSE key.
To create a blank of more than 4 sec-
onds long
Hold down the REC MUTE key for the desired length
of time. When you release the key, the deck enters the
record-pause mode.
To create a blank of less than 4 sec-
onds long
Press the PAUSE key within 3 seconds of pressing the
REC MUTE key.
NOTE
If you press the REC MUTE key when the deck is
in the record-pause mode, no signal is recorded
for about 4 seconds, and then the deck shifts
back to the record-pause mode.
ª
ª
Recording silence
Mic mixing recording
This function allows you to record your voice and
another audio source together on a cassette tape.
The mic sound is fed into both the Left and Right
channels so it is located in the center of the stereo
image.
You have the choice of either selecting the audio
source you want on the amplifier connected to the
LINE IN jacks of the deck, or plugging the desired
source directly into the deck’s LINE IN jacks.
NOTE
To prevent feedback (howling), disable the
speaker outputs from the amplifier. Use head
-
phones to monitor recording.
This cassette deck is not compatible with stereo
mics. Always use a mono mic.