Filter
Top Products
TASCAM CD-DJ1 7
Beware of condensation
If the unit (or a compact disc) is moved from a cold
to a warm place, or used after a sudden temperature
change, there is a danger of condensation; vapor in
the air could condense on the internal mechanism,
making correct operation impossible.
Sleep function
If playback is paused and the unit has not been used
for 30 minutes, the unit will automatically go to
sleep, stopping the CD mechanism and turning off
the backlight.
Attach the DC plug of the supplied AC adapter to the
DC IN jack on the rear panel and connect the power
plug to a standard electrical power outlet.
Pressing the POWER switch on the rear panel lights
up the display. After a brief start-up screen, the home
screen will appear.
Power supply
1- Introduction
Precautions and notes for placement and use
Please use the CD-DJ1 only within its operating tem-
perature range of 5°C to 35°C (41°F to 95°F). Please
avoid use or storage in dusty or humid environments
because these conditions can cause malfunction.
To maintain top performance, and prolong operating
life, observe the following notes, precautions and
environmental conditions:
Avoid exposing it to extremes of temperature and
humidity and avoid mechanical shocks.
Keep the unit away from strong magnetic fields
(TV sets, computer monitors, large electric
motors, etc.).
Relative humidity should be 30 to 90 percent.
As the unit may become hot during operation,
always leave sufficient space above the unit for
ventilation. Do not operate this unit in a confined
space such as a bookcase, and do not put anything
on top of the unit.
•
•
•
•
Avoid placing this unit on top of any heat-generat-
ing electrical device such as a power amplifier.
Always use the supplied AC adapter (PS-PS5)
with the standard home electrical power out-
let. Use of other AC adapters may damage the
CD-DJ1.
Use the unit on a table or rack that is level and
sturdy.
Wipe dirt from the unit with a dry cloth. Never
use thinner, benzene or other solvents because
they may cause acrylic parts and coated surfaces
to dissolve, labels to be eroded or other damage.
•
•
•
•