Filter
Top Products
IMPORTANT SAFETY INSTRUCTIONS
TASCAM CD-DJ1 13
3- Setup menu
Setup menu operation
Various settings can be made using the CD-DJ1
Setup menu. These settings remain even when the
power is turned off.
1. Push the SETUP key on the front panel. The
Setup menu screen appears. The cursor points
to the currently selected menu item.
Cursor
Menu item
Current
value
2. Select a menu item using the JOG dial and
push the ENTER key. The current value will
be highlighted in reverse contrast.
3. Change the value using the JOG dial.
4. Press the ENTER key to set the value. The
highlighting will disappear, and other items
in the Setup menu can be selected with the
JOG dial.
5. Repeat steps 2 through 4 to set other menu
items.
6. When setting menu items is complete, press
the SETUP key to exit the Setup menu.
The Setup menu allows adjustment of the following parameters.
Menu item Displayed Function Manual section
Key Original KEY ORIG Turns Key Original function on and off Key Original function (page 19)
Digital Attenuation D. ATT Sets output volume Setting output volume (page 23)
TT-M1 Calibration TTM CAL Calibrates TT-M1 TT-M1 Calibration (page 22)
Auto Cue AUTO CUE Turns Auto Cue on and off Auto Cue (page 15)
Auto Ready AUTO RDY Turns Auto Ready on and off Auto Ready (page 15)
CD-ROM Folder play FOLDER Selects disc playback range Playback range selection (page 20)
Flash Start FLASH Turns Flash Start on and off Flash Start (page 17)
Auto Play AUTOPLAY Turns automatic playback at startup Auto Play (page 23)
on and off
CUE Key mode CUE KEY Selects CUE key operation mode Cue (page 16)
Loop OUT Key mode OUT KEY Selects OUT key operation mode Loop playback (page 17)
SEARCH Key function SRCH KEY Selects SEARCH key function Track search (page 15)
LCD Contrast LCD CONT Adjusts LCD contrast Adjusting the contrast (page 23)
Backlight Dimmer DIMMER Adjusts display backlight brightness Adjusting the backlight (page 23)
System Reset RESET Resets CD-DJ1 settings and data Resetting the unit (page 22)
to original factory values
Menu configuration