Filter
Top Products
TASCAM CD-500/500B 23
NOTE
In jog mode, if you stop searching, playback will pause,
but the sound at the current position will be output
continuously.
Playback modes
This unit has 4 playback modes.
The current playback mode is indicated on the display.
Continuous playback mode (default
ª
setting)
Nothing appears in the playback mode indication area at
the top of the display.
The tracks on the disc are played back in numerical order.
Single playback mode
ª
S
appears in the playback mode indication area at the top
of the display.
The selected track is played back once and then playback
stops.
Program playback mode
ª
PGM
appears in the playback mode indication area at the
top of the display.
Tracks are played back in the order programed in advance.
(See “Program playback” on page 27.)
Random playback mode
ª
RANDOM
appears in the playback mode indication area at
the top of the display.
Tracks on the disc are played back in random order.
Selecting the playback mode
Use the following procedures to set the desired playback
mode using the controls on the player or the included
TASCAM RC-500 remote control.
Using the front panel buttons:
When in shift mode (SHIFT indicator lit), press the CALL
[PLAY MODE] button to cycle through the playback
modes.
Using the remote control:
Press the PLAY MODE button to cycle through the
playback modes.
Ordinary
playback
single
playback
program
playback
ramdom
playback
NOTE
Playback mode settings are retained even when the
power is turned off.
5 – Operation