Filter
Top Products
1 – Introduction
14 TASCAM CC-222SLMKII
2 – Features of the CC-222SL@#
e DISPLAY key Changes the time display for the disc
recording and playback.
r FADER key Use this key to perform automated fade-
in and fade-out when recording to disc. The time is set
using menu items.
t PLAY MODE key Allows the selection of either con-
tinuos, single, programmed or random playback.
y INTRO CHECK key Allows the first 10 seconds of
every track on a disc to be played.
u REPEAT key Sets the repeat mode (single track, or disc
repeat playback) on and off.
i A-B key Use this key to set the start and end points of a
repeat loop and to cancel such a loop.
oMENU key Repeated presses of this key shows differ-
ent menu items.
p ENTER key Used to confirm menu settings.
a Number keys (0 through 10, +10, and CLEAR key)
Use number keys to enter track numbers for disc playback.
The CLEAR key cancels the last track entered.
s SEARCH Ô/ keys Used for “fast forward” and
“fast reverse” through a disc.
d CD SKIP Â/¯ keys Used to select tracks or menu
parameter values.
f CD REC key Places the disc in record standby mode and
performs manual track incrementing while recording.
g CD REC MUTE key During disc recording, press-
ing this key inserts a silence of about four seconds and
pauses recording.
h FINALIZE key Used when finalizing recordable discs.
j ERASE key Used when erasing data from CD-RW discs.
k SYNC REC key Turns synchronized recording of the
disc recorder on and off.
l CD STOP key Stops CD playback or disc recording.
; CD PAUSE key Pauses or resumes CD playback or
recording (starts recording from record pause mode).
z CD PLAY key Starts CD playback or recording (from
record standby mode).
RC-222SL Remote control unit
2
3
1
4
5
6
8
0
7
9
q
w
e
r
t
y
u
i
o
p
a
s
d
f
g
h
j
k
l
;
z
1 Tape RESET key Resets the tape counter to zero.
2 Tape RTZ key Returns the tape to the zero position.
3 Disc Eject key Ejects the loaded disc.
4 Tape ∆/˚ key Fast-rewinds or fast-forwards the
tape.
5 Tape REC MUTE key When recording to cassette and
this key is pressed, the sound is muted for about four
seconds, and the unit enters record standby mode.
6 Tape REC key When stopped, pressing this key enters
recording standby mode.
7 Tape STOP key Stops the current tape transport operation.
8 Tape PAUSE key Stands by for tape playback or
recording. Pressing this key again resumes the operation.
9 Tape ˙PLAY key Starts tape playback or recording,
from right to left.
0 Tape PLAY¥ key Starts tape playback or recording,
from left to right.
qCONT PLAY key Use this key to turn continuous play-
back (alternating between disc and cassette) on and off.
w AUTO SPACE key Automatically adds a space of about
four seconds between disc tracks on playback.