Filter
Top Products
20
Wiring variants
Connecting the sub-woofer to the
surround
receiver SR 1535 R
Wiring diagram 1
Connecting the sub-woofer to devices with a
SC
LINK
interface
Wiring diagram 2
Switch / adjustor setting
No.
Purpose
Control voltage present
Automatic power-on
CTRL
Filter
CTRL / FILTER ON
The settings of the switches / adjustors
,
,
and
can be changed as required.
Connect the output socket of the signal source (e.g.
SR 1535 R / PA 820 M) to the sub-woofer's DIN IN input
socket
using the SC
LINK
lead (8-pin DIN lead).
The signal to control the sub-woofer's internal filter is
passed via the SC
LINK
lead. The filter is now switched
on or off by the signal source as required.
The control voltage for the automatic power-on circuit is
also transferred via the SC
LINK
lead.