Filter
Top Products
8
User's Manual
User's Manual
User's Manual
User's Manual
Control Panel Features continued
10. (continued)
EURO (230 VAC) MODEL: Connect
the linecord to the subwoofer before
connecting the other end to a 230 Volt,
50/60 Hz AC outlet. The outlet must
have a cir cuit rating of 6 amps or more.
Never plug the EURO (230 VAC)
model subwoofer directly into
120-130 Volts AC.
11. Line Fuse
The subwoofer is supplied with a con-
ser va tive slow-blow type fuse to protect
the elec tron ics.
Always unplug the power cord
before inspecting or changing
the fuse. Never use a fuse with a
larger current rating than shown
on the markings next to the fuseholder.
12. EQ LED
This LED provides feedback during the
EQ procedure. It also lights continu-
ously whenever the subwoofer is not in
standby.
13. Start button
Used to calibrate the EQ. See page
12 for details on the EQ calibration
procedure.
14. EQ ON/OFF Switch
This switch is used to turn the EQ on
or off. It allows you to easily judge
the effect of the EQ on the subwoofer
performance.
15. Microphone Input
This is the input connection for the
supplied linear measurement micro-
phone used during the automatic EQ
procedure. See page 12 for details of
the EQ procedure.
16. POWER LED
This red LED indicates when the
subwoofer is connected to AC Power.
When a 12 volt trigger voltage or an
audio signal is applied, this LED goes
out and the blue EQ LED lights up.
12
13
15
16
14
10
11