Sunfire XTATM265230 Speaker User Manual


 
17
User's Manual
User's Manual
User's Manual
User's Manual
The SLAVE output from one
ATMOS subwoofer can be con-
nected to the SLAVE input of a
second ATMOS subwoofer. The
second subwoofer will then re-
ceive the optimum audio signals
from the rst.
There is no need to adjust
the controls of the second
subwoofer, as the audio is con-
trolled by the controls and EQ
setting of the rst. The second
subwoofer does not require
any connections to its line-level
inputs.
Before the EQ procedure,
make sure that both ATMOS
subwoofers are connected
together as shown. The micro-
phone should be connected
to the rst subwoofer. The
automatic EQ procedure will
take into account the effect of
both subwoofers as they play in
the room.
Using the slave input and output