Filter
Top Products
11
OPERATION
• PREVIEWING ALL TRACKS
Press SCN button (21) to play first several
seconds of each track on the current disc.
Press again to stop intro and listen to track.
• REPEATING THE SAME TRACK
Press RPT button (22) to continuously repeat
the same track. Press it again to stop repeat.
• PLAYING ALL TRACKS IN RANDOM
Press SHF button (23) to play all tracks on
MP3 disc in random order. Press again to
cancel the function.
• SELECTING TRACKS BY AMS/MP3
BUTTON
AMS button is assigned as Digital Audio
Mode selection button in MP3 operation.
When pressed, it is activated as selecting
each mode of Digital Audio.
“Searching track directly” => “Searching
Directory or File Name”=> “Navigation” from
root by MANU/SKIP UP/DOWN buttons=>
“Navigation” from current directory by
MANU/SKIP UP/DOWN buttons.
Searching Track Directly
Press AMS (MP3) button one time. It enters
into “Searching track directly” mode in Digital
Audio CD.
The unit searches the track selected
by following direct numeric buttons:
M1-M6, MOD (7), MANU/SKIP DOWN (8),
MANU/SKIP UP (9), DSP(0).
If you select 3 digits, the unit searches the
track at once. If you enter one or two digits,
the unit waits for ENT (BND/LOU) button
to be pressed. The unit will search for the
track after few seconds, even if the ENT
button has not been pressed.
Searching Directory or File Name
Press AMS (MP3) button twice. It enters
into “Searching Directory or File Name” in
Digital Audio CD.
The unit searches files and directories that
have the same character which is inputted
by the user pressing the corresponding
buttons listed on the Table 1 below.
Explain as follows:
- Use the corresponding buttons to
select the characters A to Z, blank,
0 to 9, _, -, +.
- Press PUSH SEL button to confirm
entry of each character.
- Press BND/LOU (ENT) button to start
the title search.
In case the selected title is a directory
name, display will show (‘ ‘),
then
- Use the MANU/SKIP UP/DOWN
buttons to list all songs under this
directory and select the title.
- Press BND/LOU (ENT) button to confirm
title, and start play.
- Repeat the above steps if the newly
selected title is again a directory.
Searching From Root Directory
Press AMS (MP3) button three times. The
unit searches file or directory from root by
using MANU/SKIP UP/DOWN buttons. (D-
DIR icon turns on if the name is a directory).
Display will list all available directories and
songs. Select the desired directory/songs
by using MANU/SKIP UP/DOWN buttons
and BND/LOU (ENT) button to confirm. If
the selected title is a song, it starts to play.
If the selected title is a directory name,
display will show (‘ ‘), then
- Use the MANU/SKIP UP/DOWN
buttons to list all songs under this
directory and select the title.
- Press BND/LOU (ENT)
button to confirm and start the play.
- Repeat the above steps if the newly
selected title is again a directory.
Searching From Current Directory
Press AMS (MP3) button four times. The
unit searches file or directory from current
directory by using MANU/SKIP UP/DOWN
buttons. (D-DIR icon turns on if the name
is directory). The current directory name is
displayed for a second and the current
playing file name is displayed (selected).
The user can select the directory or file in
the directory by using MANU/SKIP
UP/DOWN buttons. The selected file can
be played by pressing BND/LOU (ENT)
button.
• DISPLAY INFORMATION
Press DSP button. If available, ID3 TAG
information is displayed when you push this
button. Supported TAG is Songname, Artist,
Album, Year, Comments. If not available,
the words Unknown Songname, Unknown
Artist, No Album Title, Unknown Year and
No Comments will appear on LCD display.
Also - if ID3 TAG is not available, the words
No ID3 TAG are displayed after Comments.
“MP3” icon turns on when MP3 disc is played
and blinks when it is in navigation mode.