Filter
Top Products
14
General operations
Power button
Press any button (except OPEN) or insert disc to switch the unit on. Press POWER button for several
seconds to switch the unit off.
Volume control
Press VOL+/VOL- buttons to adjust the volume level.
Audio settings adjustment
Press SEL button until the display shows: VOL => BAS => TRE => BAL => FAD. Press VOL+/VOL-
buttons to adjust each setting. Press SEL button for 2 seconds to enter the menu mode. Press it
repeatedly to choose the needed item: TA SEEK/ALARM, MASK DPI/ALL, TA VOL, RETUNE L/S, EQ
MODE, LOUD ON/OFF, CLK FORMAT, VOL LAST/ADJ, V-ADJ, BEEP ON/OFF, STEREO/MONO,
LOCAL/DX.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive TP
(Transport Program) information for 5 seconds. Press VOL+/VOL- buttons to select the desired
mode: TA ALARM and TA SEEK.
- TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to
next station, which has not the same station (PI – Program Information) as the last station, but
has the TP information. When TP information gets lost at the current station for retune time
which is set by RETUNE SHORT (30 seconds) or RETUNE LONG (90 seconds), the radio starts to
retune to next same PI station. When the same PI station does not catch in 1 cyclic search, the
radio retunes to next station with TP information.
- TA ALARM
During searching the radio does not retune but the double beep sound (alarm) is output.
MASK mode