Filter
Top Products
Getting Started
9
GB
Tip
Connect the speaker cords to the terminals on the
speakers.
2 Connect the surround speakers.
(FST-ZX8/LBT-ZX8 only)
Connect the speaker cords to the
SURROUND SPEAKER (SPEAKER B)
terminals and to the terminals on the
speakers as shown in the tip above.
3 Connect the FM and AM antennas.
Set up the AM loop antenna, then connect
it.
4 For models equipped with a voltage
selector, set VOLTAGE SELECTOR to
the position of your local power line
voltage.
5 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
• Be sure to match the color of the speaker terminals on
the system and the connectors.
• Be sure to connect the speakers securely and
correctly.
Inserting two R6 (size AA)
batteries into the remote
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
Red (3)
Black (#)
Red (3)
Black (#)
FRONT
(SPEAKER A)
R
L
SPEAKER
SURROUND
(SPEAKER B)
R
L
Grey
AM
FM75
COAXIAL
Extend the FM lead
antenna horizontally
AM loop
antenna
VOLTAGE SELECTOR
120V
220V
230-240V
E
e
E
e
continued