Filter
Top Products
Getting Started
11
GB
Positioning the speakers for
FST-ZX6/LBT-ZX6 only
Place the front speakers at an angle of 45
degrees from your listening position.
1 Press ?/1 to turn on the system.
2 Press CLOCK/TIMER SET.
“CLOCK” appears in the display. Then, the
hour indication flashes in the display.
3 Press M or m (or >+ or –. on the
remote) repeatedly to set the hour.
4 Press ENTER.
The minute indication flashes in the
display.
5 Press M or m (or >+ or –. on the
remote) repeatedly to set the minute.
6 Press ENTER.
The clock starts functioning.
To adjust the clock
1 Press CLOCK/TIMER SET.
“PLAY SET?” flashes in the display.
2 Press M or m (or >+ or –. on the
remote) to select “CLOCK SET?”, then
press ENTER.
The hour indication flashes in the display.
3 Do the same procedures as step 3 to 6
above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
45
Main Unit
Front
Speaker
(L)
Front
Speaker
(R)
Setting the clock