Filter
Top Products
16
GB
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the frequency of your favorite stations manually.
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“AUTO” lights up in the display.
3 Press TUNING +/– (or >+ or –. on
the remote).
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. “TUNED” lights
up in the display. When a FM stereo
program is tuned in, “ST” lights up in the
display.
If “TUNED” does not lights up in the
display and the scanning does not stop
Set the frequency of the radio station you
want as described in steps 2 to 6 of “Manual
tuning preset”.
4 Press MEMORY (or TUNER MEMORY
on the remote).
A preset number flashes in the display. The
stations are stored from preset number 1.
5 Press TUNING +/– (or >+ or –. on
the remote) repeatedly to select the
preset number you want to store.
6 Press TUNER ENTER or ENTER.
“Complete!” appears in the display. The
station is stored.
7 Repeat steps 1 to 6 to store other
stations.
Manual tuning preset
You can manually tune in and store the radio
frequency of your favorite stations.
1 Press TUNER/BAND repeatedly to
select “FM” or “AM”.
2 Press TUNING MODE repeatedly until
“MANUAL” lights up in the display.
3 Press TUNING +/– (or >+ or –. on
the remote) repeatedly to tune in the
station you want.
4 Press MEMORY (or TUNER MEMORY
on the remote).
A preset number flashes in the display. The
stations are stored from preset number 1.
5 Press TUNING +/– (or >+ or –. on
the remote) repeatedly to select the
preset number you want to store.
6 Press TUNER ENTER or ENTER.
“Complete!” appears in the display. The
station is stored.
7 Repeat steps 1 to 6 to store other
stations.
Other Operations
Tuner
Presetting radio stations
AUTO
preset number
To Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 16).
Stop scanning
during automatic
tuning
Press TUNING MODE.
MANUAL
preset number