Filter
Top Products
Recording
37
GB
Recording
To pause recording
Press MD u (MD X on the remote). Press the button
again to resume recording.
Recording from a CD
Track marks on the source CD are recorded on the
same positions on the MD. Track marks are also added
automatically on the MD when you pause recording.
If unnecessary track marks are added, erase them after
recording (see ”Combining recorded tracks” on page
48).
1 Insert a CD.
2 Press CD x to activate the CD player.
3 Insert a recordable MD.
4 Press REC/REC MODE (z on the remote).
The player stands by for recording.
5 Press MD u (MD N or MD X on the remote).
Recording will be made from the last recorded
position.
6 Press CD u.
To stop recording
Press MD x.
To pause recording
Press MD u (MD X on the remote). Press the button
again to resume recording.
Tip
When you record a
programme of a station
whose name is labelled
on this player, the
station name is
recorded automatically
as the track name (up
to 50 names) (page 23).
Notes
• After
you stop recording,
do not disconnect the
mains lead or move
the player while “TOC
EDIT” is flashing in
the display. If you do
so, recording may not
be done properly.
• If you turn up the
volume too high,
sound skipping may
occur.
Tips
• To record over the
previous recording, see
page 40.
• To add track marks
during recording, press
REC/REC MODE
where you want to add
track marks.
• To add track marks
after recording, see
“Dividing recorded
tracks” on page 46.