Filter
Top Products
Additional Information 51
EN
Troubleshooting
General
Remedy
• Press OPERATE to turn on the player.
• Connect the AC power cord to the AC IN socket
and a wall outlet securely.
• Make sure the batteries are inserted correctly.
• Replace all the batteries with new ones if they
are weak.
• Adjust the volume.
• Unplug the headphones when listening through
speakers.
• You have done a wrong operation./Your
operation was not accepted by the player.
n Operate again according to the Operating
Instructions.
• Replace all the batteries with new ones.
• Replace all the batteries with new ones if they
are weak.
• Someone is using a portable telephone or other
equipment that emits radio waves near the
player. n Move the portable telephone, etc.,
away from the player.
• Make sure that the CD tray is closed.
• Place the CD with the label surface up.
• Clean the CD.
• Take out the CD and leave the CD tray open for
about an hour to dry moisture condensation.
• Press p on the CD section to switch the function
of the player to “CD”.
• Reduce the volume.
• Clean the CD, or replace it if the CD is badly
damaged
• Place the player in a location free from
vibration.
• Move the player away from the TV or radio.
• The player is set to operate a MD recorder. n
Press CONTROL MD m CD so that you can
operate the CD section of the player.
CD Player
Symptom
There is no audio.
“ERROR” appears in the display.
The power is turned off
automatically.
Unusual sound is heard.
The sound is noisy, weak or has
poor quality.
Noise is heard.
The CD does not play.
“NO DISC“ lights in the display
even when a CD is in place.
The sound drops out.
When listening to the CD, the TV or
radio becomes noisy.
You cannot operate the CD section
of the player.
continued