Filter
Top Products
The Tape Player
The Tape Player
27
EN
Recording programed tracks (EDIT PGM)
The first half of the programed tracks will be recorded
on one side of the tape, and the second half will be
recorded on the other side. According to the tape you
use, you can set the total recording time.
1 Press p until “CD” appears in the display.
2 Press MENU.
3 Turn the jog dial until “EDIT” flashes and press
ENTER.
4 Turn the jog dial until “EDIT PGM” flashes and
press ENTER.
Tip
The tape length needed
to record the whole CD,
appears in the display
(unit: 2 minutes, up to
98 minutes).
Note
Do not open the CD
compartment while
editing; the settings for
recording will be erased.
If you do, start from step
1 again.
.
p
ENTER
PUSH
OPEN/CLOSE
DUB START
CD m TAPE
MENU Jog dial
EDIT
continued