Filter
Top Products
The Timer36
EN
Timer-recording
radio programs
You can set timer to record the radio at a
certain time.
Make sure you have set the clock (see
“Setting the clock” on page 31.)
Before you begin, make sure the t (clock) indication is
not lit in the display. If it is lit, press STANDBY.
1 Tune in the radio station and insert a blank tape
into the tape compartment with the side you want
to record on facing you.
2 Press DIR MODE to
select recording
direction of the tape.
3 Press TIMER/SLEEP.
4 Turn the jog dial until “TIMER SET” flashes in the
display and press ENTER.
5 Turn the jog dial until “TIMER REC” flashes in the
display and press ENTER.
Notes
• When using the player
on batteries, set the
timer when the power
is on.
• You cannot preset
recording timer and
waking up timer (page
32) at the same time.
Tips
• We recommend that
you use the AC power
cord as a power source
for optimum recording
quality.
• When you receive the
MW/LW program in
step 1, press r/P to
check if the noise is
heard. If so, press
MODE to select the
position that most
decreases the noise.
On the player, use
MENU to select “ISS”.
display
One side
Both sides
DIR MODE
STANDBY
ENTER
Jog dialTIMER/
SLEEP