Filter
Top Products
7
GB
Hooking Up the Components
Additional Audio Hookups
If your DVD player is equipped with 5.1ch OUTPUT jacks
you can connect them directly to this unit’s INPUT 1 or
INPUT 2 jacks to enjoy the sound of the DVD player’s
multi channel decoder. Alternatively, the INPUT 1 and 2
jacks can also be used to connect another multi channel
decoder. You can also connect pre out jacks on a separate
stereo system to the BYPASS 2ch jacks.
To prevent damage to your speakers, do not connect
components whose volume cannot be controlled to the
BYPASS 5.1ch or BYPASS 2ch jacks.
Audio signals input to the BYPASS 5.1ch or BYPASS 2ch
jacks are not routed through this unit’s MASTER
VOLUME control. They are output at the same level
they were input.
Required cords
Audio cords (3 cords are supplied)
When connecting a cord, be sure to match the color-coded pins to
the appropriate jacks on the components.
Monaural audio cords (not supplied)
For the INPUT 1 / INPUT 2 CENTER and WOOFER jacks.
Black Black
z When making woofer and center channel connections
You can use one set of pins (e.g., red) on the audio cord (not
supplied) to connect the CENTER jacks and the other set (e.g.,
white) to connect the WOOFER jacks.
White (L) White (L)
Red (R) Red (R)
ç
ç
ç
ç
ç
ç
ç
ç
ç
PRE OUT
WOOFER
FRONT REAR CENTER
L
R
INPUT 1
WOOFER
FRONT REAR CENTER
L
R
INPUT 2
WOOFER
FRONT REAR CENTER
L
R
BYPASS 5.1ch
WOOFER
FRONT REAR CENTER
L
R
BYPASS 2ch
L
R
5.1ch OUTPUT
WOOFER
FRONT REAR CENTER
L
R
5.1ch OUTPUT
WOOFER
FRONT REAR CENTER
L
R
PRE OUT
L
R
CTRL A1
TO POWER AMP
Multi channel decoder
DVD player
Stereo pre amplifier
TA-P9000ES