Filter
Top Products
12
GB
Location of Parts and Basic Operations
Rear Panel Parts Description
1 INPUT 1 and 2 jacks
Connect to the 5.1ch OUTPUT jacks on your DVD
player or secondary multi channel decoder (etc.) (see
page 7).
2 BYPASS 5.1ch jacks
Connect to the pre out jacks on a multi channel control
amplifier (see page 5).
Signals input to the BYPASS 5.1ch jacks are output
though the PRE OUT jacks (4) when the power is
turned off.
3 BYPASS 2ch jacks
Connect to the pre out jacks on a stereo control
amplifier (see page 7).
61 2 3 4 5
PRE OUT
WOOFER
FRONT REAR CENTER
L
R
INPUT 1
WOOFER
FRONT REAR CENTER
L
R
INPUT 2
WOOFER
FRONT REAR CENTER
L
R
BYPASS 5.1ch
WOOFER
FRONT REAR CENTER
L
R
BYPASS 2ch
L
R
CTRL A1
TO POWER AMP
To prevent damage to your speakers, do not connect
components whose volume cannot be controlled to the
BYPASS 5.1ch or BYPASS 2ch jacks.
Audio signals input to the BYPASS 5.1ch or BYPASS 2ch
jacks are not routed through this unit’s MASTER
VOLUME control. They are output at the same level
they were input.
4 PRE OUT jacks
Connect to your power amplifier(s) (see page 6).
5 CTRL A1 jack
Use to turn the TA-N9000ES power amplifier on/off
automatically whenever you turn this unit on/off
using the supplied remote (see page 8).
6 AC power cord
Connect to a wall outlet.