Filter
Top Products
10
EN
Amplifier Operations
Using the remote
The remote lets you operate the amplifier and the
connected Sony components that can be controlled
with the remote commander.
1 Press one of the SYSTEM CONTROL/
FUNCTION buttons to select the component you
want to use.
The amplifier and the selected component turn
on.
The SYSTEM CONTROL/FUNCTION buttons on
the remote are factory-set as follows:
To listen to or watch Press
Records PHONO
Radio programs TUNER
Compact Discs (CD) CD
Digital Audio Tapes (DAT) DAT/MD
or MiniDiscs (MD)
Audio tapes TAPE
TV programs TV
Video tapes VIDEO 1 (VTR 3*)
VIDEO 2 (VTR 1*)
VIDEO 3 (VTR 2*)
Laser discs LD
Decoded Dolby Digital AC-3 5.1 INPUT
programs
* Sony VCRs are operated with a VTR 1, 2, or 3 setting
that correspond to Beta, 8mm, and VHS respectively.
If you want to change the factory setting of a button
See page 20.
If the component does not turn on
Press the power switch on the component.
2 Start playing.
Refer to “Remote Button Descriptions” on page 27
for details.
To turn off the components
Press SYSTEM OFF. This will also turn off the video and
audio components connected to the SWITCHED AC
OUTLETs on the back of this unit at the same time.
If you use a Sony TV
When you press TV to watch a TV program, the TV
turns on and switches to the TV input. The TV also
turns on automatically and switches to the appropriate
video input when you press VIDEO 1, VIDEO 2. If the
TV does not switch to the appropriate input
automatically, press TV/VIDEO on the remote.
Watching TV without the amplifier (for Sony TVs
only)
Press TV CONTROL ON to set the remote to operate TV
functions only (see “Remote Button Descriptions” on
page 27 for details). When you press this button, the TV
turns on and switches to the TV input. If the TV does
not automatically switch to the TV input, press TV/
VIDEO.
Indexing Program Sources
This feature is useful when, for example, you have
more than one VCR: you can label one VCR as “VHS”
and label the other as “8mm.” Then, you can have the
amplifier display the index names so you can tell
which VCR you are using. This feature also comes in
handy if you connect a component to jacks designed
for another component (for example, connecting a
second CD player to the DAT/MD jacks or a DVD
player to the LD jacks).
TA-VA8ES
TA-VA7ES
SYSTEM OFF
SYSTEM
CONTROL/
FUNCTION
FUNCTION
DISPLAY
DPC
MODE
POSITION
CHARACTER
DPC
MODE
POSITION
CHARACTER
FUNCTION
DISPLAY
TV CONTROL
ON
(Press to set remote
to operate TV only)