Sony STR-DN610 Stereo Receiver User Manual


 
40
GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB05BAS_STR-DN610-U2.fm masterpage: Left
STR-DN610
4-167-824-13(1)
1 Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR
+/– on the receiver.
2 Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3 Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.
4 Start recording on the
recording component, then
start playback on the playback
component.
Notes
•Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
•Only analog signals are output from the analog
output jack (for recording).
•HDMI sound cannot be recorded.
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver (page
30).
Tip
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 3.
* The AM tuning scale can be changed (page 42).
Recording onto a recording
media
Tuner Operations
Area code FM AM
CA2 100 kHz 10 kHz*
CEK, ECE 50 kHz 9 kHz
.
mM
>
X
x
BD DVD
SAT/
CATV
VIDEO1
VIDEO2
SA-CD/
CD
DMPORT TUNER
MENU
O
TV
HDMI 2 HDMI 3HDMI 1
TUNING
+/–
ENTER
Numeric
buttons
D.TUNING
SHIFT
TUNER
AMP
MENU
,
V/v/B/b