Filter
Top Products
50
US
You can select an operation screen using the
GUI menu, depending on the DIGITAL
MEDIA PORT adapter you want to use. For
some adapter, such as TDM-BT1, the
operation screen is fixed and you cannot
change it on the GUI screen.
1 Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2 Press V/v repeatedly to select
“Music” or “Video”, then press
or b.
3 Press TOOLS/OPTIONS.
4 Press V/v repeatedly to select
the mode you want, then press
.
The details of each mode are as follows:
•System GUI
This mode is for the TDM-iP50 and
TDM-NC1. The list of tracks will be
displayed on the GUI screen of the
receiver. You can select a track you
want and play it back on each GUI
screen.
•iPod
This mode is for the TDM-iP50.
If the option menu does not appear on the
screen, refer to the operating instructions
of the connected component.
When an adapter other than iPod is
connected, a hierarchical menu does not
appear.
To operate the TDM-iP50 or
TDM-NC1 using the GUI menu of
the receiver
1 Make sure that “System GUI” is
selected in step 4 in “Selecting
the operation screen” (page
50).
2 Press V/v/B/b repeatedly to
select the content you want
from the contents list displayed
on the GUI screen, press to
play it back.
Selecting the operation screen
2CH/
A.DIRECT
A.F.D. MOVIE MUSIC
RESOLUTION
.
>
<
<
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY
GUI MODE
O
INPUT
MODE
SLEEP
NIGHT
MODE
– CATEGORY +
V/v/b,
GUI MODE
MENU
TOOLS/
OPTIONS
Operating the component
connected to the DIGITAL MEDIA
PORT adapter
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY
GUI MODE
O
V/v/B/b,