Filter
Top Products
11
US
Name Function
G D.RANGE Lights up when dynamic range
compression is activated.
H SP A/SP B/
SP A+B
Lights up according to the front
speaker system used (page 38).
However, these indicators do not
light up if the speaker output is
turned off or if headphones are
connected.
I SLEEP Lights up when the Sleep Timer is
activated.
J A.DIRECT Lights up when “Analog Direct”
is selected.
K Tunin g
indicators
CAT
MEM
MONO
ST
SIRIUS
Lights up when the receiver tunes
in radio stations, or satellite radio
stations.
The category mode is selected
during the satellite radio
operation.
Lights up when a memory
function, such as Preset Memory
(page 54), etc., is activated.
Monaural broadcast
Stereo broadcast
The SiriusConnect Home tuner is
connected and “SR” is selected.
L S-AIR Lights up when the S-AIR
transmitter (not supplied) is
connected.
M Dolby
Pro Logic
indicators
PL
PL II
PL IIx
Lights up one of the respective
indicators when the receiver
applies Dolby Pro Logic
processing to 2 channel signals in
order to output the center and
surround channel signals.
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Note
These indicators do not light up
when either the center speaker and
surround speaker is not connected.
N BI-AMP Lights up when “SB Assign” is set
to “BI-AMP” (page 113).
O EQ Lights up when the equalizer is
activated.
Name Function
P DTS-HD
indicators
DTS-HD
MSTR
DTS-HD HI
RES
Lights up one of the respective
indicators when the receiver is
decoding the corresponding
DTS-HD format signals.
DTS-HD Master Audio
DTS-HD High Resolution
Audio
Q LPCM Lights up when Linear PCM
(Pulse Code Modulation)
signals are input.
R Playback
channel
indicators
L
R
C
SL
SR
S
SBL
SBR
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When “SP
Pattern” is set to “3/0.1”
(page 73, 85)
Sound Field: “A.F.D. Auto”