Filter
Top Products
9
GB
Indicators on the display
LH
LFE
NEO
:
6
TrueHD
DTS
-
HD
MSTR HI RESEQ RDS MEM LBR
S
-
AIR
SW
RH
PLIIx z
HDMICOAXANALOG OPT ARC
D.RANGE ST
DTS
-
ES LPCM SLEEP
BI
-
AMP
SP A B
96/24
D
+
EX
L RC
SBL SBRSB
SL SRS
qk
q;
456 8213 7
9qaqsqdqfqhqj qg
Indicator and explanation
A SW
Lights up when the audio signal is output from
the SUBWOOFER jack.
B Dolby Pro Logic indicators
Lights up one of the respective indicators when
the receiver performs Dolby Pro Logic
processing. This matrix surround decoding
technology can enhance input signals.
PL
PL II
PL IIx
PL IIz
Dolby Pro Logic
Dolby Pro Logic II
Dolby Pro Logic IIx
Dolby Pro Logic IIz
Note
These indicators may not light up depending on
the speaker pattern setting.
C Input indicators
Light up to indicate the current input.
ANALOG
Lights up when INPUT MODE is set to
“ANALOG” or no digital signals are detected
when INPUT MODE is set to “AUTO” (page
69).
HDMI
Lights up when the receiver recognizes a
component connected via an HDMI IN jack
(page 24).
COAX
Lights up when INPUT MODE is set to
“AUTO” and the source signal is a digital signal
being input through the COAXIAL jack (page
69).
OPT
Lights up when INPUT MODE is set to
“AUTO” and the source signal is a digital signal
being input through the OPTICAL jack (page
69).
Indicator and explanation
D ARC
Lights up when TV input is selected and the
Audio Return Channel (ARC) signals are
detected (page 60).
E Dolby Digital Surround indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding
Dolby Digital format signals.
D
D EX
D+
TrueHD
Dolby Digital
Dolby Digital Surround EX
Dolby Digital Plus
Dolby TrueHD
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is set to “AUTO” (page 69).
F NEO:6
Lights up when DTS Neo:6 Cinema/Music
decoder is activated (page 51).
G DTS-HD indicators
Lights up one of the respective indicators when
the receiver is decoding the corresponding DTS-
HD format signals.
DTS-HD MSTR
DTS-HD HI RES
DTS-HD LBR
DTS-HD Master Audio
DTS-HD High Resolution
Audio
DTS-HD Low Bit Rate
Audio
H S-AIR
Lights up when the S-AIR transmitter (not
supplied) is inserted.
I SP A/SP B/SP A B
Lights up according to the speaker system used
(page 34). However, these indicators do not
light up if the speaker output is turned off or if
headphones are connected.
continued