Filter
Top Products
60
GB
Enjoying the TV sound via
an HDMI cable
(Audio Return Channel)
The Audio Return Channel (ARC) function
enables the TV outputs the audio signals to the
receiver via a HDMI cable connected to the
HDMI TV OUT jack.
You can enjoy the TV sound from the speakers
connected to the receiver without connecting
the TV AUDIO IN or TV OPTICAL jacks.
1 Press AMP MENU.
2 Press V/v repeatedly to select
“<HDMI>”, then press or b.
3 Press V/v repeatedly to select
“ARC”, then press or b.
4 Press V/v repeatedly to select
“ARC ON”.
Notes
• This function does not work when you set “CTRL:
HDMI” to “CTRL OFF” in HDMI menu.
•This function is only available when
– your TV is compatible with Audio Return
Channel (ARC) function.
– INPUT MODE is set to “AUTO”.
About S-AIR products
This receiver is compatible with the S-AIR
function (page 93), which allows wireless
sound transmission between S-AIR products.
There are two types of S-AIR product.
• S-AIR main unit (this receiver):
The S-AIR main unit is for transmitting
sound.
You can use up to 3 S-AIR main units. (The
number of usable S-AIR main unit depends
on the use environment.)
• S-AIR sub unit (not supplied): The S-AIR
sub unit is for receiving sound.
– Surround amplifier: You can enjoy
surround and surround back speakers
sound wirelessly. For details, refer to the
operating instructions supplied with the
surround amplifier.
– S-AIR receiver: You can enjoy system
sound in another room.
These S-AIR products can be purchased as an
option (the S-AIR product lineup differs
depending on the area).
See the notes or instructions for the S-AIR sub
unit in this manual only when the S-AIR sub
unit is used.
Notes
•The S-AIR menu and parameters only available
when you have inserted the wireless transmitter.
•When the speaker pattern is set to a setting with
front high speakers, the surround back speakers
sound is not output from surround amplifier even if
the surround amplifier is connected.
MENU
O
AMP
MENU
,
V/v/B/b
S-AIR Operations