Filter
Top Products
62
GB
Setting up an S-AIR
product
Before using an S-AIR product, be sure to
perform the following settings to establish the
sound transmission.
• Inserting the wireless transmitter/
transceiver (page 32).
• Establishing sound transmission between
the S-AIR main unit and S-AIR sub unit (ID
setting) (page 62).
• Pairing the S-AIR main unit with a specific
S-AIR sub unit (Pairing operation) (page
63).
When you match the ID of the S-AIR main
unit and the S-AIR sub unit, you can establish
sound transmission. You can use multiple
S-AIR main unit by setting a different ID for
each unit.
To set the ID of the S-AIR main
unit
1
Press AMP MENU.
2 Press V/v repeatedly to select
“<S-AIR>”, then press or b.
3 Press V/v repeatedly to select “S-AIR
ID”, then press or b.
4 Press V/v repeatedly to select the ID
(A, B or C) you want, then press .
To exit the menu
Press MENU/HOME or AMP MENU.
To set the ID of the S-AIR sub
unit
Be sure to match the ID on S-AIR sub unit you
want to the S-AIR main unit.
For details on setting the ID of the surround
amplifier and S-AIR receiver, refer to the
operating instructions supplied with the
surround amplifier and S-AIR receiver.
Sound transmission is established as
follows (example):
Notes
•Sources with copyright protection may not be
playable on S-AIR sub unit.
•If you have connected surround amplifier,
surround sound will not be output from S-AIR
main unit.
Establishing sound transmission
between the S-AIR main unit and
S-AIR sub unit (ID setting)
.
>
<
<
MENU
O
AMP
MENU
,
V/v/B/b
MENU/
HOME
ID A ID A ID B
ID A ID B
?/1
S-AIR main unit
(this receiver)
Other S-AIR
main unit
S-AIR
sub unit
S-AIR
sub unit
S-AIR sub unit