Filter
Top Products
8
US
Name Function
GDTS/
DTS-ES/
DTS 96/24
“DTS” lights up when DTS
signals are input. “DTS-ES”
lights up when DTS-ES signals
are input.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 71).
HCAT Lights up when you select
category mode to “ONE CAT”.
For details on presetting XM
Radio station, see page 68.
IMEMORY Lights up when a memory
function, such as Preset
Memory (page 61), etc., is
activated.
JTuner
indicators
Lights up when using the
receiver to tune in radio stations
(page 58), etc.
KPreset
station
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see
page 60.
LD.RANGE Lights up when dynamic range
compression is activated
(page 40).
MNEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 53).
NCOAX Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN” (page 71).
OHDMI Lights up when the receiver
recognizes a component
connected via an HDMI IN jack
(page 19).
Name Function
P Playback
channel
indicators
L
R
C
SL
SR
S
SB
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speakers are set to “NO”
(page 42)
Sound Field: A.F.D. AUTO
SW
LC
SL
R
SR