Filter
Top Products
42
US
a)
For details, refer to the page in the parentheses.
b)
When you select this parameter, the “HDMI” indicator flashes in the display.
c)
When you set “CAL LOAD” in A. CAL menu to “LOAD YES”, the setting is displayed as “xx’xx” and
you can adjust the setting in 1 inch increment.
d)
This parameter is only available when at least one speaker is set to “SMALL” and “ CAL LOAD” is set to
“LOAD YES” in A. CAL menu.
Menu
[Display]
Parameters
[Display]
Settings Initial
setting
SYSTEM (48)
[7-SYSTEM]
Sub woofer
a)
[SW SPK]
NO, YES YES
Front speakers
a)d)
[FRT SPK]
SMALL, LARGE LARGE
Center speaker
a)d)
[CNT SPK]
NO, SMALL, LARGE LARGE
Surround speakers
a)d)
[SUR SPK]
NO, SMALL, LARGE LARGE
Surround back speaker
a)
[SB SPK]
NO, YES YES
Front left speaker distance
a)c)
[FL DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Front right speaker distance
a)c)
[FR DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Center speaker distance
a)c)
[CNT DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Surround left speaker distance
a)c)
[SL DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Surround right speaker
distance
a)c)
[SR DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Surround back speaker
distance
a)c)
[SB DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Sub woofer distance
a)
[SW DIST.]
DIST. 3 ft. to DIST. 22 ft.
(1 ft. step)
DIST. 9 ft.
Surround speaker position
a)
[SUR POS.]
BEHD/HI, BEHD/LO, SIDE/HI,
SIDE/LO
SIDE/LOW
Speaker crossover frequency
a)d)
[CRS. FREQ]
CRS > 40 Hz to CRS > 160 Hz
(10 Hz step)
CRS > 100 Hz
Brightness of the display
a)
[DIMMER]
0% dim, 40% dim, 70% dim 0% dim
AUTO
CALIBRATION
(33)
[8-A. CAL]
Auto Calibration
a)
[AUTO CAL]
A. CAL NO, A. CAL YES A. CAL NO
Calibration type
a)
[CAL TYPE]
ENGINEER, FLAT, FRT REF FLAT
Calibration load
a)c)
[CAL LOAD]
LOAD NO, LOAD YES LOAD YES