Filter
Top Products
78
US
F:\Sony SEM
HA\Revision2_DG800\JC060412_2667346121DG800_US\2667346121\US05AMP_STR-DG800-
CEL.fm
masterpage: Left
STR-DG800
2-667-346-12 (1)
Switching the audio input
mode
(INPUT MODE)
You can select the audio input mode by setting
the audio input mode when you connect
components to both digital and analog audio
input jacks on the receiver.
1 Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
• AUTO 2 CH
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• COAX FIXED
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPT FIXED
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG FIXED
Specifies the analog audio signals input to
the AUDIO IN (L/R) jacks.
Note
Some audio input modes may not be set up
depending on the input.
Listening to digital sound
from other inputs
(DIGITAL ASSIGN)
You can reassign a digital audio input to
another input. This function is convenient in
the following example.
When you have two DVD players
and no digital audio input jack is
available for the second DVD
player.
Connect the first DVD player to the DVD
COAXIAL IN jack on the receiver. You can
connect the second DVD player to the TV/SAT
OPTICAL IN jack and its analog audio/video
output jacks to the VIDEO 2 AUDIO IN and
VIDEO IN jacks on the receiver.
Then, reassign the DVD COAXIAL’s digital
audio input to DVD (DVD–DVD) and the
TV/SAT OPTICAL’s digital audio input to
VIDEO 2 (TV/SAT–VIDEO 2).
1 Press AMP and then press
MENU.
“1-LEVEL SET” appears on the display.
2 Press control button V/v
repeatedly to select “5-AUDIO
SET.”.
3 Press the control button or
control button b to enter the
menu.
4 Press control button V/v
repeatedly to select
“DIGITAL ASSIGN”.
5 Press the control button or
control button b to enter the
parameter.
Other Operations
US01COV_STR-DG800-CEL.book Page 78 Tuesday, March 14, 2006 3:53 PM