Sony STR-DG500 Stereo Receiver User Manual


 
63
GB
F:\Sony SEM
HA\Revision5_DG500\JC060283_2662258132DG500_GB\2662258132\GB05AMP_STR-DG500-
CEL.fm
masterpage: Right
STR-DG500
2-662-258-13 (2)
Other Operations
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When Sleep Timer is being used, “SLEEP”
lights up on the display.
Tip
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
Recording using the
receiver
You can record onto a MiniDisc or audio tape
using the receiver. See the operating
instructions supplied with your MD deck or
tape deck.
1 Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the playback
component for playing.
For example, insert a CD into the CD
player.
3 Prepare the recording
component.
Insert a blank MD or tape into the
recording deck and adjust the recording
level.
4 Start recording on the
recording component, then
start playback on the playback
component.
Notes
Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The audio signals input to the MULTI CH IN jacks
are not output from the analog OUT jacks even
when MULTI CH IN is selected. The analog audio
signals of the current or previously used input are
output.
Recording onto a MiniDisc or
audio tape
GB01COV_STR-DG500-CEL.book Page 63 Thursday, March 16, 2006 12:10 PM