Filter
Top Products
Other Operations
39
GB
x CONTROL A1 auto power on
(A.PWR – XXX)
Lets you turn on the receiver automatically
when the component connected via monaural
miniplug cord (see page 13) is turned on and
the playback is started.
When set to “NO”, you can save the power
consumption of the receiver during standby
mode.
x Selecting the command mode of the
remote (C.MODE.AVX)
Lets you select the command mode of the
remote. Change the command mode when you
use 2 Sony receivers in the same room.
x 2ch decode mode (
PRO LOGIC
)
Lets you specify the type of decoding for the 2
channel source. This receiver incorporates with
Dolby Pro Logic II which has movie mode and
music mode, and the receiver can reproduce the
2 channel sound in 5.1 channel through Dolby
Pro Logic II.
• When set to “DOLBY PL”, the receiver
performs the Pro Logic decoding. The source
recorded in 2 channel is decoded into 4
channels.
• When set to “II MOVIE”, the receiver performs
the Pro Logic II movie mode decoding. This
setting is ideal for the movies encoded in Dolby
Surround. Besides, this mode can reproduce the
sound in 5.1 channel when watching the videos
of old movies or in the dubbed language.
• When set to “II MUSIC”, the receiver performs
the Pro Logic II music mode decoding. This
setting is ideal for the normal stereo sources,
such as CDs.
Note
Dolby Pro Logic II does not function for DTS or
MPEG format signals.
CONTROL A1 control
system
Getting Started
This section explains the basic functions
of the CONTROL A1 Control System.
Certain components have special
functions, such as “CD Synchro Dubbing”
on cassette decks, that require CONTROL
A1 connections. For detailed information
regarding specific operations, be sure to
also refer to the Operating Instructions
supplied with your component(s).
The CONTROL A1 Control System was
designed to simplify the operation of audio
systems composed of separate Sony
components. CONTROL A1
connections
provide a path for the transmission of control
signals which enable automatic operation and
control features usually associated with
integrated systems.
Currently, CONTROL A1
connections
between a Sony CD player, amplifier
(receiver), MD deck and cassette deck provide
automatic function selection and synchronized
recording.
In the future, the CONTROL A1
connection
will work as a multifunction bus allowing you
to control various functions for each
component.
Notes
• The CONTROL A1 Control System is designed to
maintain upward compatibility as the Control
System is upgraded to handle new functions. In this
case, however, older components will not be
compatible with the new functions.
• Do not operate a 2 way remote control unit when
the CONTROL A1 jacks are connected via a PC
interface kit to a personal computer running “MD
Editor” or similar application. Also, do not operate
the connected component in a manner contrary to
the functions of the application, as this may cause
the application to operate incorrectly.
continued