Filter
Top Products
21
GB
Using Surround Sound
Sound field mode
Off
On
Type
––
CINEMA
VIRTUAL
(STR-DE345 only)
MUSIC
Adjustable parameters for each sound field when selecting programme source
MODE
––
PRO LOGIC
C. STUDIO
DOLBY V
HALL
Test tone output
No sound
Depends on centre mode (see
page 19)
No sound
From the front and the rear
speakers alternately
a) Adjustable only when the centre mode is set to PHANTOM,
NORMAL or WIDE (see page 19).
b) Adjustable only when the centre mode is set to 3 STEREO,
NORMAL or WIDE (see page 19).
Sound field mode
Off
On
Type
––
CINEMA
VIRTUAL
Adjustable parameters for each sound field when using 5.1 CH/DVD (STR-DE345 only)
MODE
––
C. STUDIO
V SURR
Test tone output
In the following order:
front (L), centre, front (R),
rear (R) and rear (L)
In the following order:
front (L), centre and front (R)
Parameters
DELAY EFFECT REAR CENTER SUB WOOFER
z
zz
a)
z
b)
z
zz
a)
z
b)
z
zz
zz z
Parameters
DELAY EFFECT REAR CENTER SUB WOOFER
zz z
zzz z
zzz
Note
To adjust the speaker volume using a test tone as described
on page 20, select the PRO LOGIC sound field. The test tone
output in all other sound fields is used for verifying whether
there is output from speakers or not.
Adjusting the delay time (PRO LOGIC sound
field only)
You can make the surround sound more effective by
delaying the output from the rear speakers (delay
time). You can select from three delay times, S (15 mS),
M (20 mS), and L (30 mS). For example, if you’ve
placed the rear speakers in a large room or apart from
your listening position, set the delay time shorter.
1 Start playing a programme source encoded with
Dolby Surround sound.
2 Press SUR.
The current delay time appears in the display.
3 Press +/– to select the level you prefer, such as
“DELAY S”, “DELAY M” or “DELAY L”.