Filter
Top Products
105
GB
Other Operations
Notes
•You cannot use the FRONT SPEAKERS B
terminals for a bi-amplifier connection.
•When you use the auto calibration function, make
the bi-amplifier settings before you perform auto
calibration.
•If you make the bi-amplifier settings, the speaker
level, balance, and equalizer settings of the
surround back speakers become invalid, and those
of the front speakers are used.
•Signals output from the PRE OUT jacks are used
with the same settings as those of the SPEAKERS
terminals.
Using the CONTROL S
Control System
If you have a CONTROL S-compatible Sony
TV, satellite tuner, monitor, DVD player or
VCR, use a CONTROL S connecting cord (not
supplied) to connect the CTRL S IN (for TV,
satellite tuner, or monitor) or CTRL S OUT
(for VCR, etc.) jack on the receiver to the
appropriate CONTROL S jack on the
respective component. Refer to the operating
instructions supplied with your TV, satellite
tuner, monitor, VCR, etc., for details.
If you connect the CTRL S OUT jack
on another component to the CTRL
S IN jack on this receiver
Example
The remote sensor on the CTRL S OUT
component receives remote codes the same
way as the remote sensor on this receiver. This
is useful if you have placed this receiver in a
rack, etc.
TV, VCR, tuner,
monitor, etc.
Receiver
Remote
continued