Filter
Top Products
10
GB
Q CAT Lights up when “ALL
CATEGORY” mode is
changed to “ONE
CATEGORY” mode during
XM Radio operation (page
85).
R ZONE 2 Lights up while operation in
zone 2 is being enabled.
S SLEEP Lights up when the sleep
timer is activated (page 98).
T L.F.E. Lights up when the disc
being played back contains
an L.F.E. (Low Frequency
Effect) channel and the
L.F.E. channel signal is
actually being reproduced,
the bars underneath the
letters light up to indicate
the level. Since the L.F.E.
signal is not recorded in all
parts of the input signal the
bar indication will fluctuate
(and may turn off) during
playback.
U ;PRO
LOGIC (II/
IIx)
Lights up when the receiver
applies Pro Logic
processing to 2 channel
signals in order to output
the center and surround
channel signals. “;PRO
LOGIC II” also lights up
when the Pro Logic II
MOVIE/MUSIC/GAME
decoder is activated.
“;PRO LOGIC IIx” also
lights up when the Pro
Logic IIx MOVIE/MUSIC/
GAME decoder is activated
(page 75).
Note
This indicator does not light if
both the center and surround
speakers are set to “NO” (page
69).
Name Function
V NEO:6 Lights up when DTS Neo:6
Cinema/Music decoding is
activated (page 75).
W DISCRETE Lights up when DTS-ES
Discrete decoding is
activated (page 64).
X MATRIX Lights up when DTS-ES
Matrix decoding is
activated (page 64).
Y SP-A/SP-B/
SP-OFF
Lights up according to the
speaker system used (page
41).
“SP-OFF” lights up when
“SP-OFF” is selected or
headphones are connected.
Z PRESET Lights up when TUNING
MODE is “PRESET.”
wj Tuner
indicators
Lights up when using the
receiver to tune in radio
stations (page 82–90), etc.
wk MEMORY Lights up when a memory
function, such as Name
Input (page 92) etc., is
activated.
wl VOLUME Displays the current
volume.
Name Function