Filter
Top Products
masterpage:Left
lename[E:\SEM_Janet\Revision_DA3100ES\J9050000_2514877121STRDA3100ESU\251487
121\GB04BSC_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-12(1)]
26
US
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1 Rotate INPUT SELECTOR to select
tuner (“FM” or “AM”).
2 Press FM/AM to select “FM” or “AM”.
3 Tune in the station that you want to
preset using Automatic Tuning
(page 25) or Direct Tuning (page 25).
Switch the FM reception mode if necessary
(page 25).
4 Press MEMORY/ENTER.
“MEMORY” appears in the display for a
few seconds. Do steps 5 to 6 before the
display goes out.
5 Press PRESET TUNING + or PRESET
TUNING – to select a preset number.
If you want to switch the memory page,
press SHIFT on the remote.
If “MEMORY” goes out before you select
the preset number, start again from step 4.
6 Press MEMORY/ENTER again.
The station is stored to the selected preset
number.
If “MEMORY” goes out before you press
MEMORY/ENTER, start again from step
4.
7 Repeat steps 2 to 6 to preset another
station.
Tuning to preset stations
1 Rotate INPUT SELECTOR to select
tuner (“FM” or “AM”).
2 Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Each time you press the button, you can
select the preset station as follows:
Using the remote
1 Move the easy scroll key to select “TUNER”,
then press the key repeatedly to select “FM”
or “AM”.
2 Press PRESET/CH/D.SKIP +/– repeatedly
to select the preset station you want.
Presetting radio stations
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
GB01COV_STR-DA3100ES-U.book Page 26 Monday, March 28, 2005 4:08 PM