Sony STR-DA3100ES Stereo Receiver User Manual


 
Getting Started
masterpage:Right
lename[E:\SEM_Janet\Revision_DA3100ES\J9050000_2514877121STRDA3100ESU\251487
121\GB03CON_STR-DA3100ES-U.fm]
model name1[STR-DA3100ES]
[2-514-877-12(1)]
19
US
Connect the supplied AC power cord to the AC
IN terminal on the receiver, then connect the AC
power cord to a wall outlet.
Notes
The AC OUTLETs on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
Make sure that the total power consumption of the
components connected to the receiver’s AC
OUTLETs does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or TVs
to this outlet. This may cause a malfunction.
Before using the receiver
Performing initial setup
operations
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
This procedure can also be used to return
settings you have made to their factory defaults.
1 Press ?/1 on the receiver to turn off the
receiver.
2 Hold down ?/1 on the receiver for 5
seconds.
3 While “ENTER to Clear All” appears in the
display, press MEMORY/ENTER on the
receiver.
After “MEMORY CLEARING...” appears in
the display for a while, “MEMORY
CLEARED!” appears.
The following are reset to their factory
settings.
MASTER VOLUME.
All settings in the SPEAKER SET UP,
LEVEL, SURR SET UP, EQUALIZER,
CUSTOMIZE, TUNER and CIS menus.
The sound field memorized for each input
and preset station.
All preset stations.
All index names for inputs and preset
stations.
4: Connecting the AC
power cord
AC power cord
CENTER
RS
L
D
K
)
L
L
AC OUTLET
SWITCHED 120W/1A MAX
AC 120V 60Hz
IMPEDANCE SELECTOR
AC OUTLET
AC IN terminal
GB01COV_STR-DA3100ES-U.book Page 19 Monday, March 28, 2005 4:08 PM