Filter
Top Products
8
Operations
To play an another part of the record
1 Set the cueing lever to the up position to raise the
stylus.
2 Move the tonearm to the desired position.
3 Set the cueing lever to the down position.
To play a 45 single
Place the supplied 45 adaptor onto the spindle.
Press SPEED to select 45 rpm.
The green indicator changes to red.
After you have finished using the adaptor, return it to
the adaptor tray.
Using the PITCH BEND + and – buttons
You can use the PITCH BEND + and – buttons to
synchronize the beat of the selection playing on one
turntable with the beat of another selection playing on
the other turntable. You can use these buttons even if
the QUARTZ lock button is turned on or off.
1 Use the PITCH ADJ. knob to synchronize the
speed of the selection playing on one of the
turntables with the speed of the selection on the
other turntable.
2 Press the PITCH BEND + and – buttons to
synchronize the beat of both selections. Pressing
and holding down the + or – button causes the
selection to play 10% faster or slower than the
normal playing speed.
z If the strobe dots are not stationary when the PITCH
ADJ. knob is set to the center position
Adjust the platter speed by sliding the PITCH ADJ.
knob toward + or – until the strobe dots become
stationary.
z If you have an extra headshell, keep it in the
headshell holder.