Filter
Top Products
4
Getting Started
Unpacking
Verify that the following items are included with your
Stereo Turntable System Package:
• PS-DJ9000 Stereo Turntable System (2)
• MX-DJ9000 Audio Mixer (1)
• Platter (2)
• Slip mat (2)
• Dust cover (with hinges) (2)
• Counterweight (2)
• Cartridge and headshell (2)
• 45 adaptor (2)
• Audio cord (with ground wire) (2)
• AC power cord (2)
• AC power adaptor cord (1)
• Audio cord (without ground wire) (2)
Getting Started
Assembling the Turntable
3
4
5
1
2
1 Carefully place the platter onto the spindle.
Make sure the two pins on the bottom of the
platter are properly inserted into the two holes in
the motor, as indicated by the arrows in the
illustration above.
2 Place the slip mat on the platter.
3 Slide the counterweight onto the shaft at the rear
of the tonearm and turn 3 or 4 times in the
direction of the arrow.
4 Insert the headshell into the end of the tonearm.
Turn the locking ring in the direction of the arrow
until the headshell is secure.
5 Insert the hinges on the dust cover into the hinge
pockets on the rear of the cabinet.