Filter
Top Products
Basic Operations
Basic Operations
6
EN
Playing a Tape
1
Turn on the amplifier and select the tape deck position.
2
Set TIMER to OFF and press POWER.
3
Press § OPEN/CLOSE and insert a cassette.
With the side you want to play
facing you
See page 7 for hookup
information.
To play a tape recorded
with the Dolby NR system
Set DOLBY NR to the same
position that the tape was
recorded in—B, C, or S.
You can connect the
headphones to PHONES
To adjust the volume, turn
PHONES LEVEL.
4
Press (.
The cassette holder closes and the deck starts playing. “TAPE”
and the tape type (I, II, or IV) appear in the display. Adjust the
volume on the amplifier.
To
Press
Stop playing p
Pause P PAUSE. Press the button again to
resume play.
Fast-forward or rewind ) or 0 when the deck is stopped
§ OPEN/CLOSE after stopping playingTake out the cassette
2
4
3
POWER
OFFREC PLAY
TIMER
REC LEVEL
DOLBY NR
OFF
B
C
S
•
•
•
•
REC EQ
BIAS
REC LEVEL
MONITOR
PHONES
LEVEL
≠ AMS ±
0()
§
rRPp
PAUSE REC MUTE
REC
OPEN/CLOSE
RESET
MPX FILTER HX PRO CALIBRATION
MEMORY
Basic Operations