Filter
Top Products
30
Location of Parts and Basic Amplifier Operations
qj SET UP button
Press to activate the setup mode, then use the cursor
buttons (w;) to select any of the following parameters.
You can make various settings using the jog dial (wa).
When you select You can
Speaker setup Specify the front, center, rear speaker
sizes, the rear speaker position, and
whether or not you are using a sub
woofer (page 19).
Speaker Distance Specify the front, center, and rear speaker
distances and the unit of measurement
(page 21).
Crossover Specify the front, center, and rear speaker
frequency* bass crossover frequency (page 22).
5.1CH video input Specify the video input to be used with
the audio signals from the 5.1CH INPUT
jacks (page 11).
Auto Function Specify whether or not Sony components
connected via Control A1 cords will turn
on or off when selected using the
function buttons (page 50).
2 way remote Turn on or off response to remote
(STR-DE945 only) signals sent from the 2 way remote (page
50).
OSD color Specify the color of the on-screen
(STR-DE945 only) display (page 51).
Dimmer Range Specify the display to turn off when you
press the DIMMER button several times
(page 51).
* Only when the speaker is set to“SMALL” in the speaker setup
parameter.
Front Panel Parts Description
qk NAME button
Press to activate the name function and enter names
for preset stations and program sources (page 48).
ql ENTER button
Press to enter individual characters for the preset
station and program source names.
w; Cursor buttons (
/ )
Press to select various speaker level, surround, and
equalizer parameters (etc.).
wa Jog dial
Turn to adjust the selected speaker level, surround,
and equalizer parameters (etc.).
ws EQ button
Press to activate the equalizer parameters (page 40).
The indicator on the button lights up and you can
adjust the various equalizer parameters.
wd SUR button
Press to activate the surround parameters (page 38).
The indicator on the button lights up and you can
adjust the various surround parameters (effect level,
wall type, etc.).
wf LEVEL button
Press to activate the speaker level parameters (page
39). The indicator on the button lights up and you can
adjust the various speaker level parameters (front
balance, rear balance, etc.).