Filter
Top Products
23
Hooking Up and Setting Up the Speaker System
Notes
• The front balance, rear balance, center level, and rear level are
shown in the display during adjustment.
• Although these adjustments can also be made via the front
panel using the LEVEL menu (when the test tone is output, the
receiver switches to the LEVEL menu automatically), we
recommend you follow the procedure described above and
adjust the speaker levels from your listening position using the
remote control.
Before You Use Your
Receiver
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see “7
SPEAKERS selector” on page 27).
Checking the connections
After connecting all of your components to the receiver,
do the following to verify that the connections were made
correctly.
1 Press ?/1 to turn on the receiver.
2 Press a function button to select a component
(program source) that you connected (e.g., CD
player or tape deck).
3 Turn on the component and start playing it.
4 Rotate MASTER VOLUME to turn up the volume.
If you do not obtain normal sound output after
performing this procedure, look for the reason in the
checklist on the following page and take the appropriate
measures to correct the problem.
Function buttons
+–
PHONES
SPEAKERS
DIMMER DISPLAY
INPUT MODE
VIDEO 1 VIDEO 2VIDEO 3 DVD/LD TV/SAT
CINEMA STUDIO EX.
MULTI CHANNEL DECODING
TAPE MD/DAT CD TUNER PHONO
5.1CH INPUT
A
BOFF
A+B
SOUND FIELD
A.F.D.
ABC
2CH MODE
LEVEL
SUR
EQ
SET UP
MASTER VOLUME
BASS BOOSTEQUALIZER
NAME
ENTER
010
VIDEO 3 INPUT
MUTING
BASS
BOOST
PRESET
TUNING
TUNING
–+
–+
MEMORY
FM/AM FM MODE
2ND AUDIO
SHIFT
EQUALIZER
VIDEO L AUDIO R
MASTER VOLUME
1/u