Filter
Top Products
Operations Using the Remote RM-PG413
masterpage:Right
lename[D:\foreigner\SEM_Janet\Revised
D
E897_Data\J9031709_4253072111DE897U\4253072111\GB08REM_STR-DE897-U.fm]
47
GB
model name1[STR-DE897]
[4-253-072-11(1)]
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
• When you press input buttons (VIDEO1, VIDEO2,
VIDEO3 or DVD), the input mode of the TV might
not switch to the corresponding input mode that you
want. In this case, press TV/VIDEO button to switch
the input mode of the TV.
• The 2ND button on the remote is not available for
receiver operation.
Set the remote command mode using the RM
SET UP button and the remote command mode
buttons.
Selecting the command mode
You can switch the command mode (AV1 and
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver.
Press AV1 or AV2 while holding down RM
SET UP.
The indicator flashes once (twice for AV2) ,
then the command mode switches.
To check the command mode of
the remote
Press RM SET UP. You can check the remote by
the indicator.
To reset the remote to factory
settings
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
The indicator flashes 3 times, then goes off.
Note
If the command mode of the receiver and the remote is
different, you cannot use the remote to operate the
receiver. To change the command mode of the
receiver, see page 57.
Remote
Button
Operations Function
H qs VCR/
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
Starts playback.
X qd VCR/
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
Pauses playback or
record. (Also start
recording with
components in record
standby.)
x ea VCR/
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck
Stops playback.
O qf VCD player/
LD player/
DVD player
Returns to the previous
menu or exits the menu.
V/v/B/b
qf
VCR/
Satellite tuner/
DVD player
Selects a menu item.
-/-- e; TV Selects the channel
entry mode, either one
or two digit.
2ND ql Remote Selects the command
mode of the remote.
Selecting the command
mode of the remote
Mode Indicator flashes
AV1 once
AV2 twice
GB01COV_STR-DE897-U.book Page 47 Wednesday, March 3, 2004 4:29 PM