Filter
Top Products
23
Location of Parts and Basic Amplifier Operations
!£ The following buttons operate the built-in tuner. For
details, see “Receiving Broadcasts” starting from page
29.
TUNING +/– buttons
Scans all the available radio stations.
PRESET TUNING +/– buttons
Scans all preset stations.
FM MODE button
If “STEREO” flashes in the display and the FM stereo
reception is poor, press this button. You will not have
the stereo effect but the sound is improved.
FM/AM button
Selects the FM or AM band.
MEMORY button
Press to memorize a preset station.
!¢ CURSOR MODE button
Press this button repeatedly to select any of the
following three cursor modes. The indicator for the
selected cursor mode lights up to the left of the display
window. The indicator turns off when you press the
SET UP button.
When the cursor mode is You can
SURROUND Change the delay time, effect
level, and the volume of the rear
and center speakers (page 27)
BASS/TREBLE Adjust the tone (bass/treble) for
the front speakers (page 27).
Press the TONE ON/OFF button
to activate the tone effect.
INDEX Enter an index name for preset
stations and program sources
(page 34)
!∞ Cursor buttons ( / / / )
After pressing the CURSOR MODE or SET UP button,
use these buttons to make specific settings (see pages
16, 27, and 34 to 36).
!§ SET UP button
Press this button repeatedly to select any of the
following three indications. The selected indication
appears in the display and you will be able to make
various settings using the cursor buttons.
When you‘ve
displayed
You can
CTR MODE Select any one of the four center
modes (page 16)
DSPL SET UP Set the display at any of four levels of
brightness and display operating
status of the component connected to
the S-LINK CONTROL A1 jack (page
36)
REAR GAIN Increase the range of rear speakers by
5 dB (page 36)