Filter
Top Products
17
Hooking Up and Setting Up the Speaker System
Before You Use Your Receiver
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see “8
SPEAKERS selector” on page 21).
• Set BALANCE to the center position.
Clearing the receiver’s memory
Before you use your receiver for the first time or when
you want to clear the receiver’s memory, do the procedure
below.
TV/DBS (STR-DE625)
TAPE/MD (STR-DE525)
VIDEO 1 (STR-DE625)
VIDEO (STR-DE525)
1/u
TONE
ON/OFF
5.1/DVD
INPUT
VIDEO 1
DIRECT
TUNING
BASS
BOOST
SOUND FIELD
GENRE MODE
VIDEO 2 VIDEO 3 TV/DBS
MUTING
VIDEO 3 INPUT
BALANCE
LR
5
0
1
3
9
7
4
6
2
8
1
0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PHONES
SPEAKERS
SET UP
SURROUND
CURSOR MODE
MEMORY
PRESET
– TUNING +
A
OFF
A
+B
B
g
MASTER VOLUME
RLVIDEO AUDIO
DISPLAY
FM/AMFM MODE
–
TUNING
+
SLEEP
BASS/
TREBLE
INDEX
5.1/DVD
INPUT
BASS
BOOST
TONE
SOUND FIELD
ON/OFF
FUNCTION
TAPE/MD CD TUNER PHONO
SHIFT
1
6
2
7
3
8
4
9
5
9
1 Turn off the receiver.
2 While pressing down VIDEO 1 and TV/DBS (STR-
DE625) or VIDEO and TAPE/MD (STR-DE525), press
1/u to turn on the receiver.
“ALL CLEAR” appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory settings.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
abd preset station is cleared.
Checking the connections
After connecting all of your components to the receiver,
do the procedure below to verify that the connections
were correctly made.
MASTER VOLUME
1/u
TONE
ON/OFF
5.1/DVD
INPUT
VIDEO 1
DIRECT
TUNING
BASS
BOOST
SOUND FIELD
GENRE MODE
VIDEO 2 VIDEO 3 TV/DBS
MUTING
VIDEO 3 INPUT
BALANCE
LR
5
0
1
3
9
7
4
6
2
8
1
0
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
PHONES
SPEAKERS
SET UP
SURROUND
CURSOR MODE
MEMORY
PRESET
–
TUNING
+
A
OFF
A
+
B
B
g
MASTER VOLUME
RLVIDEO AUDIO
DISPLAY
FM/AMFM MODE
–
TUNING
+
SLEEP
BASS/
TREBLE
INDEX
5.1/DVD
INPUT
BASS
BOOST
TONE
SOUND FIELD
ON/OFF
FUNCTION
TAPE/MD CD TUNER PHONO
SHIFT
1
6
2
7
3
8
4
9
5
9
1 Press 1/u to turn on the receiver.
2 Press a FUNCTION button to select a component
(program source) that you have connected (e.g., CD
player or tape deck).
3 Turn on the component and start playing it.
4 Rotate MASTER VOLUME to turn up the volume.
If you did not obtain normal sound output after
performing the procedure above, look for the reason in
the following check-list and take the appropriate
measures to correct the problem.
There is no sound no matter which component is
selected.
/ Check that both the receiver and all components
are turned on.
/ Check that the MASTER VOLUME control is not
set at 0.
/ Check that the SPEAKERS selector is not set at
OFF or at a position for front speakers that are not
connected to the receiver (see “8 SPEAKERS
selector” on page 21).
/ Check that all the speaker cords are connected
correctly.
/ Press the MUTING button to turn off the indicator
to the left of the button.
FUNCTION buttons